Biomeditsina va amaliyot jurnali, 2022 №6

Тема статьи



Dadabaeva U. Mukhlosakhon, Azimov A. Kamron, Boltaev Y.Sanjar


Samarkand State Medical University


The effectiveness of orthopedic treatment of patients with the use of fixed dentures depends on their quality fixation on the abutment teeth. In order to improve the adhesion of the material to the tissues of the tooth, in recent years, special attention has been paid to adhesive fixation systems that improve the fixation of prostheses not only with enamel, but also with dentin. Adhesion of dental materials to dentin is difficult due to its heterogeneity. With the development of adhesive dentistry, all-ceramic restorations have become more widely used. The development and introduction of composite cement into practice have led to a change in the method of fixation of ceramic restorations using adhesive systems. Thus, the problem of choosing a material for fixing all-ceramic prostheses remains relevant. Clinical practice dictates the need for a clear differentiated approach when using modern composite cement, depending on the type of restoration.

Ключевые слова

dentoalveolar arch, fixed prosthesis structures, adhesion of composite cement, adhesive properties of glass ionomer and composite cement, ceramic crowns based on zirconium dioxide, cephalometric analysis, craniofacial complex, X-ray cephalometric parameters


Гольдштейн Р. Обработка композитных и керамических реставраций. Часть 2 // Клинич. стоматология. — 2001. - №4. - С.8-11. 2. Горохов В.Ю. Экспериментально-клиническое обоснование применения цирконового сплава для травматологии и ортопедии. // Дисс. канд. — М., 2000.-132 с. 3. Лебеденко И.Ю., Фадеев А.Ю., Широкова Ю.А., Батрак И.К., Шуман С.А. Сравнительная оценка методов изготовления зубных протезов из циркония. // Рос. стоматол. журн., 2001. - №2. - С.6-8. 4. Фадеев А.Ю. Лабораторно-экспериментальное обоснование возможности применения цирконовых несъемных зубных протезов. // Автореф. дисс. канд. - М., 2002. - 18 с. 5. Чиликин JI.B., Головин К.И., Безгина Е.В., Кулаков О.Б. Цирконий и титан. // Институт стоматологии, 2001. — №3. - С.50-52. 􀁔􀁛􀁡􀁟􀁘􀁗􀁛􀁩􀁛􀁠􀁓􀀃􀁕􀁓􀀃􀁓􀁟􀁓􀁞􀁛􀇜􀁥􀀃􀁙􀁦􀁣􀁠􀁓􀁞􀁛􀀃􀀃􀂬􀀃􀀃􀁙􀁦􀁣􀁠􀁓􀁞􀀃􀁔􀁛􀁡􀁟􀁘􀁗􀁛􀁩􀁛􀁠􀁮􀀃􀁛􀀃􀁢􀁣􀁓􀁝􀁥􀁛􀁝􀁛􀀃􀀃􀂬􀀃􀀃􀀉􀀎􀀔􀀑􀀍􀉮􀀋􀀃􀀎􀀅􀀃􀉸􀀈􀀎􀀌􀀄􀉖􀀈􀉹􀀈􀀍􀀄􀀃􀉮􀀍􀉖􀀃􀀏􀀑􀉮􀉹􀀓􀀈􀉹􀀄 №6 | 2022 284 6. Altynbekov K. D. et al. A Study of the Bond Strength of Dental Ceramic Masses and Stomet- 1kz and Stomet-2kz Cast Alloys by Three-Point Bending Methods //constructions. – 2019. – Т. 1. – С. 2. 7. Igissenova A. et al. Some aspects of the providing of medical and social assistance of elderly persons in the Republic of Kazakhstan //Annals of Tropical Medicine and Public Health. – 2017. – Т. 10. – №. 5. 8. Platonenko V. T., Shayakhmetova M. K. Laser heating of a surface inhomogeneity as a method of creating an amplifying medium for an x-ray laser //Soviet journal of quantum electronics. – 1991. – Т. 21. – №. 7. – С. 707. 9. Рузуддинов, Саурбек, Убайдилла Амираевич Амираев, and Мейрамгуль Кожахметовна Шаяхметова. "Стоматологический статус пожилых людей в Республике Казахстан." Проблемы современной науки и образования 8 (2016): 154-157. 10. Алтынбеков К. и др. Стоматологические сплавы stomet-1kz и stomet-2kz в ортопедической стоматологии //Stomatologiya. – 2017. – Т. 1. – №. 3 (68). – С. 30-32. 11. Хабилов Н. и др. Диоксид циркония-один из современных стоматологических материалов //Stomatologiya. – 2017. – Т. 1. – №. 2 (67). – С. 107-110. 12. Хабилов, Н., Дадабаева, М., Мун, Т., & Хабилов, Б. (2017). Диоксид циркония-один из современных стоматологических материалов. Stomatologiya, 1(2 (67)), 107-110. 13. Dadabaeva, M. U., and R. Z. Normurodova. "Kliniko-funkcional’nye izmenenija slizistoj obolochki proteznogo lozha do i posle protezirovanija u bol’nyh saharnym diabetom 2 tipa." Medicus 2 (2017): 57-8. 14. Dadabayeva, M. U., Rikhsieva, D. U., Mirkhoshimova, M. F., & Asemova, S. A. (2020). Changes in the oral cavity in patients with chronic kidney disease. Current approaches and research of the XXI century–2020. Editura “Liceul, 68-71. 15. Пулатов Б., Алиева Н., Дадабаева М. Современные методы мониторинга остеоинтеграции //Медицина и инновации. – 2021. – Т. 1. – №. 1. – С. 45-49. 16. Нормуродова, Р. З., Дадабаева, М. У., Мирхошимова, М. Ф., Халиметов, Ж. З., & Толмасов, С. Д. (2021). ЛЕЧЕБНО-ПРОФИЛАКТИЧЕСКИЕ МЕРОПРИЯТИЯ БОЛЬНЫХ ЗАБОЛЕВАНИЯМИ ПАРОДОНТА ПРИ САХАРНОМ ДИАБЕТЕ 2 ТИПА. In ПРОБЛЕМЫ И ПЕРСПЕКТИВЫ РАЗВИТИЯ НАУКИ И ОБРАЗОВАНИЯ В ХХI ВЕКЕ (pp. 271-281). 17. Khabilov N. L. et al. Ilyas Sh., Usmonov FK EXPERIENCE OF EXPERIMENTAL APPLICATION OF RATIONAL DESIGN OF DOMESTIC DENTAL IMPLANT //Central Asian journal of medical and natural sciencesVolume. – Т. 2. – С. 5-12. 18. Khabilov N. L. et al. Ilyas Sh., Usmonov FK EXPERIENCE OF EXPERIMENTAL APPLICATION OF RATIONAL DESIGN OF DOMESTIC DENTAL IMPLANT //Central Asian journal of medical and natural sciencesVolume. – Т. 2. – С. 5-12. 19. Burke F.J., Fleming G.J., Nathanson D., Marquis P.M. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. // J. Adhes. Dent. - 2002. - V.4, №1. - P.7-22. 20. Carinci F., Pezzetti F., Volinia S., Francioso F., Arcelli D., Farina E., Piattelli A. Zirconium oxide: analysis of MG63 osteoblast-like cell response by means of a microarray technology. // Biomaterials.- 2004. - V.25, №2. - P.215-228. 21. De Menezes M.J., Arrais C.A., Giannini M. Influence of light-activated and auto- and dualpolymerizing adhesive systems on bond strength of indirect composite resin to dentin. // J. Prosthet. Dent. - 2006. - V.96, №2. - P.l 15-121. 22. Derand T., Molin M., Kvam K. Bond strength of composite luting cement to zirconia ceramic surfaces. // Dent. Mater. - 2005. - V.21, №12. - P.l 158-1162. 23. Ernst C.P., Cohnen U., Stender E., Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. // J. Prosthet. Dent. - 2005. - V.93, №6. - P.551-558. 􀁔􀁛􀁡􀁟􀁘􀁗􀁛􀁩􀁛􀁠􀁓􀀃􀁕􀁓􀀃􀁓􀁟􀁓􀁞􀁛􀇜􀁥􀀃􀁙􀁦􀁣􀁠􀁓􀁞􀁛􀀃􀀃􀂬􀀃􀀃􀁙􀁦􀁣􀁠􀁓􀁞􀀃􀁔􀁛􀁡􀁟􀁘􀁗􀁛􀁩􀁛􀁠􀁮􀀃􀁛􀀃􀁢􀁣􀁓􀁝􀁥􀁛􀁝􀁛􀀃􀀃􀂬􀀃􀀃􀀉􀀎􀀔􀀑􀀍􀉮􀀋􀀃􀀎􀀅􀀃􀉸􀀈􀀎􀀌􀀄􀉖􀀈􀉹􀀈􀀍􀀄􀀃􀉮􀀍􀉖􀀃􀀏􀀑􀉮􀉹􀀓􀀈􀉹􀀄 №6 | 2022 285 24. Friedel W., Kern М. Fracture strength of teeth restored with all-ceramic posts and cores. // Quintess. Int. - 2006. - V.37, №4. - P.289-295. 25. Gale M.S., Darvell B.W., Cheung G.S.P. Three-dimensional reconstruction of microleakage pattern using a sequential grinding technique. // J. Dent. - 1994. - V.22. - P.370-375. 26. Hegenbarth E.A. Procera: новая технология изготовления цельнокерамических коронок. // Квинтэссенция. - 2000. - №1. - С.23-37. 27. Kennedy J.P. Computer designed and milled porcelain esthetic resin-bonded fixed partial denture. // Gen. Dent. - 2002. - V.50, №1. - P.59-61. 28. Komine F., Gerds Т., Witkowski S., Strub J.R. Influence of framework configuration on the marginal adaptation of zirconium dioxide ceramic anterior four-unit frameworks. // Acta Odontol. Scand. - 2005. - V.63, №6. - P.361-366. 29. Luthy H., Loeffel O., Hammerle C.H. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. // Dent Mater. - 2006. - V.22, №2. - P. 195-200. 30. Matinlinna J.P., Heikkinen T., Ozcan M., Lassila L.V., Vallittu P.K. Evaluation of resin adhesion to zirconia ceramic using some organosilanes. // Dent. Mater. - 2006. - V.22, №9. - P.824-831. 31. Alimdjanovich R. J., Khairullaevna O. N., Normuratovich N. A. CORRECTION OF PSYCHOLOGICAL STRESS IN CHILDREN WITH NON-PHARMACOLOGICAL METHODS OF DENTAL ADMISSION //Archive of Conferences. – 2021. – С. 108-114. 32. J. A. Rizaev.,A. A. Shodmonov. EditorJournals and Conferences. (2022, October 2). DENTAL IMPLANTATION USING COMPUTER SOFTWARE FOR ACCURATE PLACEMENT AND LONG-TERM PROSTHETIC RESULTS. 33. Rizaev, & A. A. Shodmonov. (2022). OPTIMIZATION OF THE SURGICAL STAGE OF DENTAL IMPLANTATION BASED ON COMPUTER MODELING. World Bulletin of Public Health, 15, 11-13 34. Rizaev J. A., Shodmonov A. A. Optimizing the Surgical Phase of Dental Implants Optimization of the Surgical Phase of Dental Implantation Based on Computer Modelling //Eurasian Medical Research Periodical. – 2022. – Т. 12. – С. 84-87.